Advertisement
(A blank, comma (","), and hyphen ("-") can be entered
for easy-to-read operation.)
[Related parameters]
P, T
ATEn
This command selects whether to return an echo to the
command sent from the personal computer.
* This command is written in non-volatile memory by &W.
E0
Disables a command echo.
E1
Enables a command echo.
Factory setting value: E1
ATHn
This command is used to disconnect a line when the modem
is in the command state. It is used for on-hooking (discon-
necting a line) after executing escape sequence +++ from
the online state to put a modem into the command state or
after setting ER signal from on to off in the &D1 setting
mode to put a modem into the command state (with the line
not disconnected).
H0
Sets the line of a modem to on-hook. (Disconnects a
line.)
H1
Sets the line of a modem to off-hook.
27
Advertisement
