Advertisement
Special Notices
Electrical Information
The Fujitsu Modem Station could malfunction in the event
of a change in voltage due to electrical disturbance. To
protect against voltage sag, use of an uninterruptible power
supply (UPS) is recommended.
The frequency band used for the Modem Station is the same
as for some types of industrial, scientific, and medical
equipment, including microwave ovens, as well as on-
premises radio stations (subject to a license) for identifica-
tion of mobile units, e.g., radio stations installed in produc-
tion lines in factories, and other application-specific low-
output radio stations (not subject to a license).
In the event the Modem Station causes radio interference to
an on-premises radio station for identification of mobile
units, immediately change the frequency used or break off
connection, and consult FM Information Service about
preventive measures against radio interference (for example,
installation of partitions).
If you have a problem with the Modem Station, such as
radio interference to an application-specific low-output
radio station for identification of mobile units, contact FM
Information Service for help.
Safety Instructions
This section provides information that you must follow to
avoid personal injury or damage to property when using the
2
Advertisement
