Advertisement
Installing the Bluetooth Modem Setup Tool
Install the Bluetooth Modem Setup Tool using a Bluetooth
module or a personal computer in which a Bluetooth PC
card is installed.
P O I N T
Bluetooth PC Utility must be installed before installing the
Modem Setup Tool.
1. Turn on power to your computer.
2. After Windows starts, insert the Bluetooth Modem
Setup Tool floppy disk into the computer.
3. Click the [Start] button and then click [Run].
4. Enter "a:\setup" and click the [OK] button. (Change the
drive of the floppy disk as required.)
P O I N T
If the Bluetooth Modem Setup Tool has already been
installed, it will be uninstalled when you execute "setup".
5. Click the [Next] button.
6. Confirm the directory in which the tool is installed.
Change the directory if necessary and click the [Next]
button.
7. Enter each item and click the [Next] button.
Enter the device address using half-size numeric charac-
ters. Delimit them two digits at a time by half-size
colons (:).
16
Advertisement
