Advertisement
P O I N T
All commands that follow Z in the same command line are
ignored.
Related parameters:
A/
This command executes the command line just before the
current one again.
P O I N T
The A/ command is the only command that AT does not
precede.
AT&Cn
This command selects the transmission conditions of a CD
signal to the personal computer.
* This command is written in non-volatile memory by &W.
&C0
Turns on a CD signal at all times irrespective of the
carrier from the destination modem.
&C1
Turns on a CD signal while the carrier from the desti-
nation modem is detected.
Factory setting value:
&F, &W
&C1
35
Advertisement
