Advertisement
ATSr=n
This command writes a value in the specified S register.
r
Number of S register (0 to 91)
n
Value to be written in S register
Example: ATS0=2S6=5 @
The modem writes 2 in SO register and 5 in S6 register.
ATSr?
This command is used to read the contents of S register. The
contents of the specified S register are sent to the personal
computer.
r
Number of S register (0 to 91)
ATT
This command sets the current dial to a tone dial.
Parameter T can be omitted using the subsequent dial
command.
* This command is written in non-volatile memory by &W.
[Related parameters]
D,P
30
Advertisement
