Mounting Your Edge Gateway - Dell Edge Gateway 3002 Installation And Operation Manual

Example (AT&T):
network-manager.nmcli con add type gsm ifname cdc-wdm0 con-name ATT_GSMDEMO apn
broadband
Example (3G):
network-manager.nmcli con add type gsm ifname cdc-wdm0 con-name 3G_GSMDEMO apn
internet
d. Connect to the mobile network:
Command line:
network-manager.nmcli con up <connection-name>
Example (Verizon):
network-manager.nmcli con up VZ_GSMDEMO
Example (AT&T):
network-manager.nmcli con up ATT_GSMDEMO
Example (3G):
network-manager.nmcli con up 3G_GSMDEMO
To disconnect from the mobile network:
Command line: network-manager.nmcli con down <connection-name>
Example (Verizon):
network-manager.nmcli con down VZ_GSMDEMO
Example (AT&T):
network-manager.nmcli con down ATT_GSMDEMO
Example (3G):
network-manager.nmcli con down 3G_GSMDEMO

Mounting your Edge Gateway

NOTE: Mounting can be completed before or after configuring your Edge Gateway.
NOTE: Mounting options are sold separately. Mounting instructions are available in the documentation shipped with the
mounting device.
NOTE: In some environments where the Edge Gateway is installed, a more robust mounting method is required. For
example, in marine applications, due to vibrations unique to that environment, only standard-mount bracket should be
used.
Mounting the Edge Gateway using the standard-mount bracket
Mounting dimensions
20