Planet ISW-1022MT Quick Installation Manual page 9

Switch(config)# ip address 192.168.1.100 255.255.255.0 192.168.1.1
The previous command would apply the follow settings for the Managed Industrial
Switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
6. Repeat Step 2 to check if the IP address is changed.
If the IP is successfully configured, the Managed Industrial Switch will apply the
new IP address setting immediately. You can access the Web interface of Managed
Industrial Switch through the new IP address.
If you do not familiar with console command or the related param-
eter, enter "?" anytime in console to get the help description.
Note
Figure 6-2 Set IP address screen