Printer Font Commands - Courier Character Set; Printer Font Commands; Printer Graphic Commands; Magnetic Card Reader Control Commands - Printek Mt3 Series Operator's Manual

Printer Font Commands – Courier Character Set
Font Name Character size
(WxH)
24 CPI normal 8x21
21 CPI normal 9x21
19 CPI normal 10x21
16 CPI normal 12x21
12 CPI normal 16x21
13 CPI rotated 14x16
MSP Font 10-32 Dot Matrix Fonts
CPI

Printer Font Commands

Command String
ESC - 'F' – 1
ESC - 'F' – 2
ESC - 'U' - '1'
ESC - 'U' - '0'

Printer Graphic Commands

Printer Command
String
ESC - 'a' – n
ESC - 'J' – n
ESC - 'P' - '#'
ESC - 'P' - '$'
ESC - 'V' - n1 – n2

Magnetic Card Reader Control Commands

Command String
ESC - 'M' - 'nnm' - cr
ESC – 'C'
Command String
ESC+'k'+'5'
ESC+'k'+'4'
ESC+'k'+'3'
ESC+'k'+'2'
ESC+'k'+'1'
ESC+'k'+'0'
ESC+'F'+'2' through '8'
Printer Action
Selects International character set
Selects PC Line Draw character set
Enable emphasized print.
Disable emphasized print.
Printer Action
Select dot line spacing between printed lines.
Graphic Line Feed command
Select Online mode, characters printed as received.
Select Buffer mode, characters are printed on (^ D)
8-bit Graphic command
Printer Action
Select MCR with (nn) auto timout
Cancel MCR read process
19