Annual Test (Inspection And Testing During Operation) - Linde ARCLINE Cool 2 Operating Instructions Manual

Annual test (inspection and testing during operation)

6.3.3
The welding machine may only be tested by competent, capable personsl. A capable person is one who,
because of his training, knowledge and experience, is able to recognise the dangers that can occur while
testing welding power sources as well as possible subsequent damage and who is able to implement the
required safety procedures.
A periodic test according to IEC 60974-4 "Periodic inspection and test" has to be carried out. In addition to
the regulations on testing given here, the relevant local laws and regulations must also be observed.
Disposing of equipment
6.4
Proper disposal!
The machine contains valuable raw materials, which should be recycled, and electronic
components, which must be disposed of.
• Do not dispose of in household waste!
• Observe the local regulations regarding disposal!
Manufacturer's declaration to the end user
6.4.1
• According to European provisions (Directive 2012/19/EU on Waste of Electrical and Electronic
Equipment), used electric and electronic equipment may no longer be placed in unsorted municipal
waste. It must be collected separately. The symbol depicting a waste container on wheels indicates that
the equipment must be collected separately.
This machine has to be disposed of, or recycled, in accordance with the waste separation systems in use.
• According to German law (law governing the distribution, taking back and environmentally correct
disposal of electric and electronic equipment (ElektroG)), used machines are to be placed in a collection
system separate from unsorted municipal waste. The public waste management utilities (communities)
have created collection points at which used equipment from private households can be disposed of free
of charge.
• Information about returning used equipment or about collections can be obtained from the respective
municipal administration office.
099-008600-55801
29.08.2017
Maintenance, care and disposal
Disposing of equipment
19