Design And Function - Linde ARCLINE Cool 2 Operating Instructions Manual

Design and function

Assembly/disassembly
Design and function
5
Risk of injury from electrical voltage!
Contact with live parts, e.g. power connections, can be fatal!
• Observe the safety information on the first pages of the operating instructions!
• Commissioning must be carried out by persons who are specifically trained in handling power
sources!
• Connect connection or power cables while the machine is switched off!
Read and observe the documentation to all system and accessory components!
Assembly/disassembly
5.1
Risk of accidents due to screw connectors that are not locked!
Attention must be paid to cleanliness and correct installation when
mounting a power source with a cooling module. The cooling module
could become loose if not properly mounted, thereby causing serious
injuries.
• Remove dirt from the feet of the power source's unit and the screw
connectors of the cooling module before mounting.
• Check that the connections are locked in place before each transport
(push the screw connections back in as far as they will go)!
Assembly and disassembly is very simple and doesn't require any tools.
• Open out all four screw connectors on the cooling module as far as they will go.
• Position the welding machine precisely with the machine's feet in the openings of the screw connectors
provided on the cooling module.
• Push all four screwed connectors back in as far as they will go.
12
WARNING
WARNING
Figure 5-1
099-008600-55801
29.08.2017