Maintenance, care and disposal
Maintenance work, intervals
Maintenance work, intervals
6.3
Daily maintenance tasks
6.3.1
Visual inspection
•
Mains supply lead and its strain relief
•
Gas cylinder securing elements
•
Check hose package and power connections for exterior damage and replace or have repaired by
specialist staff as necessary!
•
Gas tubes and their switching equipment (solenoid valve)
•
Check that all connections and wearing parts are hand-tight and tighten if necessary.
•
Check correct mounting of the wire spool.
•
Wheels and their securing elements
•
Transport elements (strap, lifting lugs, handle)
•
Other, general condition
Functional test
•
Operating, message, safety and adjustment devices (Functional test)
•
Welding current cables (check that they are fitted correctly and secured)
•
Gas tubes and their switching equipment (solenoid valve)
•
Gas cylinder securing elements
•
Check correct mounting of the wire spool.
•
Check that all screw and plug connections and replaceable parts are secured correctly, tighten if
necessary.
•
Remove any spatter.
•
Clean the wire feed rollers on a regular basis (depending on the degree of soiling).
Monthly maintenance tasks
6.3.2
Visual inspection
•
Casing damage (front, rear and side walls)
•
Wheels and their securing elements
•
Transport elements (strap, lifting lugs, handle)
•
Check coolant tubes and their connections for impurities
Functional test
•
Selector switches, command devices, emergency stop devices, voltage reducing devices, message and
control lamps
•
Check that the wire guide elements (inlet nipple, wire guide tube) are fitted securely.
•
Check coolant tubes and their connections for impurities
•
Check and clean the welding torch. Deposits in the torch can cause short circuits and have a negative
impact on the welding result, ultimately causing damage to the torch.
18
099-008600-55801
29.08.2017