Table of Contents
Advertisement
FatTwin F619P2-RT/RTN/RC0/RC1 User's Manual
Expansion Card Installation
Each node supports one expansion card. This expansion card must be plugged into a riser
card, which in turn plugs into the serverboard.
Assembling the PCI-E Slot Bracket
1. Remove the (3) mounting screws securing the PCI-E bracket to the node.
2. Lift the PCI-E bracket out of the node.
3. Remove one screw securing the PCI-E IO Shield to the bracket, and remove the IO
Shield. (Keep the screw, it will be used in step 5)
4. Insert the expansion card into the riser card
5. Secure the expansion card by using the same screw removed in step 3.
6. Install the PCI-E bracket back into the node while simultaneously plugging the riser card
into the serverboard.
7. Secure the PCI-E bracket with the (3) screws used in Step 1.
Figure 3-16. Assembling the PCI-E Slot Bracket and Cards
Riser Card
PCI-E Slot
Bracket
38
Riser Card
Mounting Screws
Advertisement
Table of Contents
