System Specifications - Supermicro FatTwin F619P2-RT User Manual

Table of Contents

Advertisement

FatTwin F619P2-RT/RTN/RC0/RC1 User's Manual
Appendix C

System Specifications

Processors
Dual Intel® Xeon® Scalable processors in an Socket P type socket
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel Intel C621 chipset
BIOS
128 Mb AMI® Flash ROM
Memory
Four 240-pin DIMM slots that can support up to 1536 GB of 72-bit DDR4 unbuffered ECC 2666/2400/2133 Mhz speed SDRAM
Note: See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel C621) controller
Drive Bays
Each node has six (6) 2.5" SATA3 HDD/SDD (F619P2-RT), or two (2) 2.5" SAS3/SATA3 HDD/SDD and four (4)
2.5" SAS3/SATA3/NVMe (F619P2-RTN and F619P2-RC0)
PCI Expansion Slots
One (1) PCI-Express 3.0 x16 slots supported by CPU1
One (1) PCI-Express 3.0 x16 (x8 + x8) SMCI storage Slot (JSXB2)
One (1) PCI-Express 3.0 x16 SIOM LAN Port
Motherboard
X11DPFR-S; Proprietary form factor ((LxW): 9.66" x 8.53" (216.66 mm x 499.36 mm))
Chassis
F418BC2-R2K20BP; 4U Rackmount, (WxHxD) 17.63 x 6.96 x 29 in. (448 x 177 x 737 mm)
System Cooling
Each node has three (3) 4-cm counter-rotating PWM fans
Power Supply
Model: PWS-2K20A-1R
AC Input Voltages: 100-240 VAC
Rated Input Current: 4.2A (100V) to 1.8A (240V)
Rated Input Frequency: 50-60 Hz
Rated Output Power: 2200W
Rated Output Voltages: +5V (18A), +3.3V (15A), +12V (29A), +5Vsb (3A), -12V (0.5A)
Operating Environment
Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
144

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fattwin f619p2-rc0Fattwin f619p2-rc1Fattwin f619p2-rtn

Table of Contents