Infrared Interface, Send Measurement Data - Unitest Telaris 0751 Instruction Manual

Infrared Interface, send Measurement Data / Maintenance / Cleaning

7.6 Infrared Interface, send Measurement Data

Additionally, all stored measurement data may be
transferred to the PC (for reporting) by the Infrared
Interface. For this purpose, the interface adapter
and the Software "es control 0701/0702" (Cat. No.
1252) and Interface (Cat. No. 1157), available as an
optional feature, are required.
The data transfer procedure is fairly easy:
Carry out measurements and save theses by
pressing key "Store" (10), see also section 7.1
and 7.2
Apply the Interface adapter (Cat. No. 1157) to
TELARIS 0751.
Connect interface cable via 9pole D-sub con-
nector to serial interface of PC (ie COM 1).
Call the "es control 0701/0702" Software
(please refer to user manual "es control 0751").
Data transfer is carried out. After a succesfull
data transfer all stored data is available for fur-
ther processing in the PC.
8.0 Maintenance
When using the appliance in compliance with the in-
struction manual, no special maintenance is re-
quired.
8.1 Cleaning
If the appliance is dirty after daily usage, it is advised
to clean it by using a damp cloth and a mild house-
hold detergent.
53