Table of Contents
Advertisement
Infrared Interface, send Measurement Data
6.1 Infrared Interface, send Measurement Data
Additionally, all memorised measurement data may
be transferred to the PC (data archive) by means of
an Infrared Interface. For this purpose, the interfa-
ce adapter and the Software "Report-Studio" (Cat.
No. 1206) and Interface (Cat. No. 1157), available
as an optional feature, are required.
The data transfer procedure is fairly easy:
Apply the Interface adapter to TELARIS
Connect adapter cable to PC (COM 2) via 9pole
D-sub plug (RS232).
Call the "Report-Studio" Software (please refer
to user manual "Report-Studio").
Select menu item "read data" or select the but-
ton "read data from measurement instrument"
by mouse click. The message "send data" ap-
pears.
Press key "Send" (26).
Data transfer is carried out. After a few seconds
all stored data is available for further proces-
sing in the PC.
For further details, please refer to user manual
"Report-Studio".
18
7.0 Deleting Stored Measurement Data / Display
of All Memory Entries
It is possible to delete data by using key „Clear" (27).
Furthermore, it is possible to display the total num-
ber of measurement value entries on the display:
Display of Total Number of Measurement Value
Entries:
Set measurement range selection switch (31) to
one of the 5 measurements ranges.
Briefly press „Clear" key (27). A short beep sig-
nal is audible.
The total number of all measurement values that
have been saved is now displayed.
Delete Last Stored Measurement Value:
Set measurement range selection switch (31) to
one of the 5 measurement ranges.
Briefly press „Clear" key (27). A short beep sig-
nal is audible and the number of the memorised
measurement data is displayed.The total num-
ber of all stored measurement data is dis-
played.The display disappears after approxi-
mately 2 seconds.
Now release the key „Clear" (27) to avoid dele-
tion of all memory entries.
Deleting the last measurement value can be re-
peated as often as required, as long as data is
available within the memory.
Deleting all Stored Measurement Values:
Set measurement range selection switch (31) to
one of the 5 measurement ranges.
Press „Clear" key (27) for approx. 5 seconds.
A beep signals are audible. The number of all
stored measurement values is displayed.
The last stored value is deleted after 2 seconds.
After 5 seconds, all values are deleted.
„0" appears on the display. The memory is com-
pletely deleted, the „M" symbol in the display
disappears.
Advertisement
Table of Contents
