Transport And Storage - Unitest Telaris 0751 Instruction Manual

Transport and Storage/Safety Measures

2.0 Transport and Storage

Please keep the original packaging for later trans-
port, e.g. for calibration. Any transport damage due
to faulty packaging will be excluded from warranty
claims.
In order to avoid appliance damage, we recommend
that accumulators are removed when not using the
appliance over a certain period of time. However,
should the appliance be contaminated by leaking
battery cells, you are kindly requested to return it to
the factory for cleaning and inspection.
Appliances must be stored in dry and closed areas.
In the case of an appliance transported in extreme
temperatures, a recovery time of at least 2 hours is
required prior to appliance operation.
3.0 Safety Measures
The UNITEST TELARIS 0701/0702 has been de-
signed and checked in accordance with the safety
regulations for Electronic test and Measurement
Appliances EN 61010 and IEC 61010, and left our
factory in a safe and perfect condition. The instruc-
tion manual contains information and references
necessary for safe operation and maintenance of the
appliance.
In order to avoid electrical shock, the valid safe-
ty and VDE regulations regarding excessive
touch voltages must receive the utmost atten-
tion when working with voltages exceeding
120V (60V) DC or 50V (25V)rms AC. The val-
ues in brackets are valid for limited areas (as
for example medicine and agriculture).
Measurements in dangerous proximity of elec-
trical installations are only to be executed when
instructed by a responsible electrical special-
ist, and never alone.
6
Prior to usage, inspect the appliance and test
leads for external damage. Prior to any opera-
tion, ensure that connecting leads used and ap-
pliances are in perfect condition. The appliance
may no longer be used if one or several func-
tions fail or if the appliance does not appear to
be ready to function.
Only touch test leads and test probes at handle
surface provided. Never directly touch test
probes.
If the operator's safety is no longer guaranteed,
the appliance is to be put out of service and pro-
tected against use. The safety can no longer be
guaranteed if the appliance (or leads):
• shows obvious damage
• does not carry out the desired measurements
• has been stored for too long under un-
favourable conditions
• has been subjected to mechanical stress dur-
ing transport.
The appliance may only be used within the op-
erating ranges as specified in the technical data
section.
Avoid any heating up of the appliance by direct
sunlight to ensure perfect functioning and long
appliance life.