Deleting Saved Measurement Data/View The Memory Location Number - Unitest Telaris 0751 Instruction Manual

Deleting Saved Measurement Data/View the Memory Location Number

7.5 Deleting Saved Measurement
Data/View the Memory Location Number
It is possible to delete the last measurement value
or all measurement values by pressing the key
"Clear/Recall" (13). Furthermore, it is possible to
display the memory location number of all saved
measurement values and UUT numbers:
7.5.1 Display of Memory Location Number (total
number of saved measurement data and
UUT numbers):
Briefly press the key "Clear/Recall" (13). An
acoustic signal is audible.
The last memory location number is briefly dis-
played, followed by the display of the saved
measurement results and limit values.
7.5.2 Delete Last Saved Measurement Value:
Press the key "Clear/Recall" (13) and keep it de-
pressed.
An acoustic signal is audible and the last mem-
ory location number is briefly displayed. After-
wards, the measurement value or the UUT num-
ber saved at this memory location is displayed
Press the key "Clear/Recall" (13) further until
"Clr" is displayed on the screen and the dis-
played memory location number is reduced by
one. A further acoustic signal is simultaneous-
ly audible.
Now release the key "Clear/Recall" (13) to avoid
deletion of the complete memory.
Deleting the last saved measurement value or
last entered UUT number can be repeated as
desired, i.e. as long as data is available within
the memory.
52
7.5.3 Delete all Saved Measurement Values:
Press the key "Clear/Recall" (13) and keep it de-
pressed.
An acoustic signal is audible and the last mem-
ory location number is briefly displayed. After-
wards, the measurement value or the UUT num-
ber saved at this memory location is displayed
A beep signal is audible after 2 sec. and the last
stored value is deleted.
A beep signal is audible after 2 sec. and all
stored values are deleted.
"0" appears on the LC-display. The memory is
completely deleted, the „M" symbol in the dis-
play disappears.