EBS CPX200NB User Manual page 9

10. Casing Opening Latch
To open the casing it is recommended to use flat 2.5-5mm screwdriver. Insert it
slightly in indicated hole and perform slight lever movement toward the rear side
of the casing.
11. Anti-Sabotage Switch
After the keypad is assembled the switch contact is closed. Unauthorized
disassembly of the keypad will send the message to the alarm control unit. In
order to eliminate surface unevenness, a spring is located on the switch lever.
CPX200NB ALARM CONTROL UNIT – USER MANUAL
EN
9 / 30