User Delete - EBS CPX200NB User Manual

To add a new user:
1. Enter the function code
2. Enter the admin code and confirm it with
correct code input.
3. Numbers of already existing users will be displayed.
4. Enter the ID of newly added user (1 to 8), other than already added ID
numbers, and press
have access to will be displayed.
5. To activate/deactivate LED of an appropriate partition, press 1 or 2. When the
access is set, press
6. Enter the code of a newly added user (4 to 7 digits) and press
confirm.
7. Enter the code of a newly added user again and press
or to exit without saving changes.
8. Successful adding a new user will be confirmed with 3 beeps, otherwise a
constant sound will be emitted.

7.5. USER DELETE

You can delete a user here. Codes can be deleted by the administrator only. 3 beeps
will confirm the successfully entered function. Default admin code: 1111.
Note: You cannot delete Admin account (user no. 0) and
Installer account (user no. 9)
To delete a user:
1. Enter the function code
2. Enter the admin code and confirm it with
correct code input.
3. Numbers of already existing users will be displayed.
4. Enter the ID code (1- 8) of a user to be deleted and press
to exit without saving changes.
5. Successful deletion of a user will be confirmed with 3 beeps, otherwise a
constant sound will be emitted.
7.6. CHANGE OF USER CODE
The user can change its code here. 3 beeps will confirm the successfully entered
function.
CPX200NB ALARM CONTROL UNIT – USER MANUAL
EN
and press
to confirm. Numbers of partitions a new user can
to confirm. All LEDs shall be off now.
and press
to confirm.
. 3 beeps will confirm the
to finish adding
to confirm.
. 3 beeps will confirm the
to confirm or
to
18 / 30