Accu-Chek Guide User Manual page 30

Blood glucose meter
Hide thumbs Also See for Guide:
Table of Contents

Advertisement

Blood Glucose Tests
3
11
Add Comment appears. Press
to highlight a comment.
Press
to set the comment for
the result. See the Adding
Comments to Blood Glucose
Results section of this chapter
for details.
14
Advance to the next lancet.
28
52926_07414587001_EN.indb 28
12
The final result appears. Press
or
to set the comment
and return to Main Menu. Or to
change the comment, press
to select the comment.
to return to Add
Press
Comment.
15
Wash hands thoroughly with
soap and water.
13
Press here to eject test strip
Remove and discard the used
test strip by pulling the test
strip out of the meter or by
pushing the test strip ejector on
the side of the meter.
6/2/16 2:52 PM

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Guide and is the answer not in the manual?

Questions and answers

Marie Clemens
March 10, 2025

My meter keeps saying error I have changed the batteries

1 comments:
Mr. Anderson
March 10, 2025

Your Accu-Chek Guide meter may show an error message after changing the batteries due to several reasons:

1. Incorrect Battery Installation – Ensure the new batteries are correctly inserted with the (+) side facing up and properly positioned under the black tabs.
2. Expired or Low-Quality Batteries – Use two new, unexpired CR2032 lithium coin cell batteries of the same brand.
3. Incomplete Battery Replacement – Always replace both batteries at the same time.
4. Battery Compartment Not Secure – Ensure the battery door is fully closed and snapped into place.
5. Meter Needs Reset – Try removing the batteries, waiting a few minutes, and reinserting them.

If the issue persists, perform a control test to check accuracy. If problems continue, contact Accu-Chek Customer Care.

This answer is automatically generated

Bob Ptak
May 9, 2025

How do I know if batteries are bad in the accu check guide link

Table of Contents

Save PDF