Table of Contents
Advertisement
Chapter 1: Your New System
The Accu‑Chek Guide Meter
2
3
Front View
1. Display
Shows results, messages, and test
results stored in memory.
2. Back Button
Returns to a previous display or field.
3. Up Arrow and Down Arrow Buttons
Press to move between menu options
or to increase or decrease numbers.
4. Power/Set/OK Button
Turns meter on or off and sets options.
5. Test Strip Slot with Light
Insert test strip here.
52926_07414587001_EN.indb 9
Your New System
1
4
5
Back View
6. Battery Door
Flip open to replace batteries.
7. Micro USB Port
Transfers data from the meter to a computer
(PC).
8. Test Strip Ejector
Press to remove test strip.
1
6
7
8
Side View
9
6/2/16 2:52 PM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Guide and is the answer not in the manual?
Questions and answers
My meter keeps saying error I have changed the batteries
Your Accu-Chek Guide meter may show an error message after changing the batteries due to several reasons:
1. Incorrect Battery Installation – Ensure the new batteries are correctly inserted with the (+) side facing up and properly positioned under the black tabs.
2. Expired or Low-Quality Batteries – Use two new, unexpired CR2032 lithium coin cell batteries of the same brand.
3. Incomplete Battery Replacement – Always replace both batteries at the same time.
4. Battery Compartment Not Secure – Ensure the battery door is fully closed and snapped into place.
5. Meter Needs Reset – Try removing the batteries, waiting a few minutes, and reinserting them.
If the issue persists, perform a control test to check accuracy. If problems continue, contact Accu-Chek Customer Care.
This answer is automatically generated
How do I know if batteries are bad in the accu check guide link