Table of Contents
Advertisement
Set the Language
The meter may prompt you to choose a language the first time you turn it on.
1
Turn the meter on by briefly
pressing
. Language
appears.
Press
or
to highlight the
language.
NOTE
If you select the wrong language and cannot correct it, contact the Accu‑Chek Customer Care Service
Center at 1‑800‑858‑8072.
52926_07414587001_EN.indb 17
Your New System
2
Press
to set the desired
language and return to Main
Menu.
1
17
6/2/16 2:52 PM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Guide and is the answer not in the manual?
Questions and answers
My meter keeps saying error I have changed the batteries
Your Accu-Chek Guide meter may show an error message after changing the batteries due to several reasons:
1. Incorrect Battery Installation – Ensure the new batteries are correctly inserted with the (+) side facing up and properly positioned under the black tabs.
2. Expired or Low-Quality Batteries – Use two new, unexpired CR2032 lithium coin cell batteries of the same brand.
3. Incomplete Battery Replacement – Always replace both batteries at the same time.
4. Battery Compartment Not Secure – Ensure the battery door is fully closed and snapped into place.
5. Meter Needs Reset – Try removing the batteries, waiting a few minutes, and reinserting them.
If the issue persists, perform a control test to check accuracy. If problems continue, contact Accu-Chek Customer Care.
This answer is automatically generated
How do I know if batteries are bad in the accu check guide link
I can’t get the battery compartment cover to catch in place. What size batteries should I use? 2032? Accu-check guide model 930