Table of Contents
Advertisement
Section 5: Maintenance and
There are several error messages or warnings that will appear
on the LCD Display. Below is a descriptions of each and their
possible solutions.
Input Empty.
The left or right bin is out of discs. Add the discs specified in
the control panel. The LCD will only show you which discs to
load if bin selection has been enabled. (See 4A for more infor-
mation on bin selection). If bin selection is disabled, the LCD
will display a generic input empty error. In this case it is up to
the user to know which type of media to load into the unit.
INPUT EMPTY
Add these discs -
Left Bin: DVD-R
Right Bin: CD-R
Ink Low
When Ink levels reach approximately 10% a warning will be
displayed. You can either change the cartridge or ignore the
warning and continue printing. If you choose to ignore, it is
possible that discs will be printed with insufficient ink which
will cause poor print quality.
INK LOW
CARTRIDGE: COLOR
Press
Press
Troubleshooting
to change
to ignore
Maintenance and Troubleshooting
41
Advertisement
Table of Contents
