Remote Operation - Lopi Cypress GSR2 Deluxe Owner's Manual

Operation
39

Remote Operation

When the switch on the battery holder is set to "REMOTE" the transmitter operates the fireplace. Once
you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has four main sections (see illustration below).
Thermostat Display
Room Temperature Display
F
ON
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame, Blower, Light, Comfort Control)
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will come from the
IFC. When you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep twice whenever a button is pressed. When
the batteries are nearly depleted, the IFC will no longer beep. See "IFC Batteries" on page 43).
© Travis Industries 1/3/18 - 1444 Cypress GSR2