External Antenna Connectors - Aruba AP-344 Installation Manual

Table 2 Radio Status LEDs
Color/State
Off
Green- solid
Green- blinking
Amber- solid
Amber- blinking
Green/Amber- alternating One radio operating in access mode; one radio in monitor mode
Blue- On
LED Display Settings
The LEDs have three operating modes that can be selected in the system management software:
Default mode: Refer to
Off mode: LEDs are off
Blink mode: LEDs blink green
Figure 2

External Antenna Connectors

The AP-345 access points are equipped with four external antenna connectors located on the front
corners of the access point (see
Aruba 340 Series Access Points
Meaning
Meets one of the following conditions:
device is powered off
both radios are disabled
Both radios operating in access mode
One radio operating in access mode; one radio disabled
1
Both radios operating in monitor mode
One radio operating in monitor mode; one radio disabled
Radios operating in dual-5GHz mode
Table 1-4
AP-344 access point (rear view)
DC power socket
Kensington Lock
Figure
| Installation Guide
ENET1 ENET0
48V 650mA
57V 600mA
K
3).
USB port
Ethernet ports
Console port
CONSOLE
Reset button
3