HIKVISION DS-2CS54D7T-IRS User Manual page 7

7. Install the upper cover back by tightening the torx
screws.
Figure 2. 6 Install the Upper Cover
Note:
The camera is in optimum surveillance angle by

default. Slightly adjust the pan tilting angle
according to the actual environment.
The upper cover should be installed before having

the live view
Chapter 3
Two methods are available to call the menu. This
section takes the method b) as the example to state the
menu operation.
a) Call the menu and adjust the camera parameters
with a coaxial camera controller (purchase
separately).
b) Call the menu with supported TVI DVR by clicking
button on the PTZ interface, or by calling preset
No. 95.
Camera
Steps:
1. After the connection is done, power on the analog
camera, TVI DVR, and monitor to view the image on
the monitor.
2. Click PTZ Control to enter the PTZ Control Interface.
3. Call the camera menu by clicking
preset No. 95.
4. Click up/down direction button to select the item,
click Iris + to confirm the selection, and click
left/right direction button to adjust the value of the
selected item.
.
Menu Description
Figure 3. 1 Connection
TVI DVR
Monitor
button, or call