Table of Contents
Advertisement
Figure 2. 2 Remove the Upper Cover
4. Fix the mounting base to the ceiling with the
supplied screws.
Note:
In the supplied screw package, both self-tapping
screws and expansion blots are contained.
If the wall is cement, expansion blots are required
to fix the camera. If the wall is wooden,
self-tapping screws are required.
Figure 2. 3 Fix the Mounting Base
5. Align the supplied adjusting tool to the small hole
on the camera, and push it to get it fixed.
Figure 2. 4 Fix the Mounting Base
6. Loosen the adjustable screw to adjust the pan angle
(±30°), the tilting angle (0° to 85°), and the rotation
angle (±180°) with the adjusting tool, then tighten
the adjustable screws.
Note:
Before adjusting the surveillance angle, you need to
power on the camera first to check whether the image
on the monitor is gotten from the optimum angle.
Figure 2. 5 3-axis Adjustment
Advertisement
Table of Contents
