Diagnostics - TomTom LINK 510 Installation Manual

Tracker Connect PTY LTD TomTom Installation TomTom LINK 510
Guide
NB: As soon as the device has established a connection to WEBFLEET the yellow LED
stays on all the time. If the LED keeps flashing for longer than 10 minutes, see

Diagnostics.

Diagnostics
Take note of the following diagnostics:
GREEN LED mode
OFF Unit is in standby mode or is not connected to power.
• Switch on ignition.
• Check if the device is properly connected to power.
OFF and short ON every 3sec Ignition off.
Rapidly flashing No operating system and/or no application available or application
failed.
• Install latest firmware application using the
TomTom Business Solutions Firmware Update
ON and short OFF every 3sec Ignition on. Application is running, device is not
activated.
• Activate device
ON Application is running, device is activated.
YELLOW LED mode
OFF Not connected - No GSM coverage.
• Check if device is connected to power, see
Connecting to power
 Switch on ignition.
• Move the vehicle as you may be in a GSM dead spot.
OFF and short ON every 3sec Not connected - Correct GSM operator not available.
• Check WEBFLEET subscription for GSM network roaming support.
• Move the vehicle as you may be in a GSM dead spot.
TSU-TTH-BTN-12-354-LINK 510 Installation Guide
Issue: 1.1
Date: 17 October 2012
Author: Yolandie Viljoen Page: 10