TomTom LINK 3000 Installation Manual

Vehicle tracking device

Advertisement

Quick Links

LINK 300
Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for TomTom LINK 3000

  • Page 1 LINK 300 Installation Guide...
  • Page 2 Tom- LINK In- stalla- tion Guide...
  • Page 3: What's In The Box

    What’s in the box TomTom LINK 300 What’s in the A Service/Update cable connector B Release button for SIM card holder C SIM card holder (SIM card installed) D Power cable connector E GPS antenna connector (SMB) for optional use of an external GPS antenna...
  • Page 4: Before The Installation

    • The TomTom WEBFLEET Contract Confirmation letter including the TomTom LINK 300 is a GPS receiver and GSM/ Activation Code. GPRS module in one unit, always providing the vehicle’s current position. When used with •...
  • Page 5: Safety First

    • Caution - use of this product is restricted • Important - damage caused through in some areas improper installation The GSM module of the TomTom LINK 300 The installation and initial operation of the is likely to interfere with electric devices unit must be performed by authorized such as cardiac pacemakers, hearing aids, personnel only.
  • Page 6 Safety first • Caution - danger of explosion Parts of TomTom LINK 300 can cause sparks, which can lead to explosions. This may endanger human health and life. Do not use the unit in areas with high risk of explosion. When using TomTom LINK 300 follow the safety regulations per the US National Electrical Code NFPA 70.
  • Page 7: Proper Installation

    Proper Installa- tion your TomTom LINK 300. You can either decide If you prefer to keep the TomTom LINK 300 in for a hidden or for a non-hidden installation. a hidden place, to protect it from high Non-hidden installation temperatures or for safety reasons (to not obstruct the driver’s view e.g.
  • Page 8 Proper Installation Non-hidden Hidden...
  • Page 9: Connection Overview

    Connection overview Connec- tion overview * See “Technical data” on page 24. ** Make sure the wire is fused with 15 A.
  • Page 10: Connecting To Power

    Connecting to power Connect TomTom LINK 300 to the vehicle Connecting to power power supply with the standard vehicle voltage (12 V / 24 V). Do not connect to a voltage converter. The three wires GND, IGN and PWR+ (supply voltage) must be connected.
  • Page 11: Testing Operation

    1. Please check all connections to the TomTom LINK 300 (wires, fuses etc.). For this test put the TomTom LINK 300 into the place where you want to affix it (please see 2. Check that the SIM card is inserted Mounting the TomTom LINK 300 on page 13).
  • Page 12 • Optimally find a place with a distance bigger than 12 inch to the TomTom navigation device. The TomTom LINK 300 can be affixed to the windshield or the dashboard with the two adhesive strips. For information about a hidden installation such as in the glove compartment, see Alternative Mounting on page 18.
  • Page 13 Mounting the TomTom LINK 300 1. Choose a flat surface for accurate positioning of the unit. 2. Clean the surface with the provided cleaning tissue, so that the surface is oil free, dry and clean. 3. Remove the protective film from one side of the strips.
  • Page 14 & WEB- FLEET TomTom navigation device to fully enjoy the benefits of Connected Navigation. 1. Make sure that the TomTom LINK 300 is connected to power and has GPRS connection. 2. Switch on the navigation device. 3. Tap the screen to bring up the main menu.
  • Page 15 On the driving view of your navigation device the two red crossed arrows must not be displayed. You can always check the connection status between the two devices by tapping Connection status under TomTom LINK preferences on your navigation device.
  • Page 16 TomTom navigation device and TomTom WEBFLEET (see Connecting to navigation device & WEBFLEET on page 15), you can now close the TomTom LINK 300 with the plastic seal. IMPORTANT: Once you have closed the TomTom LINK 300 with the plastic seal, the device cannot be opened again without damaging the seal.
  • Page 17: Alternative Mounting

    Alternative Mounting Using the holder Alternati Mount- You can also choose to mount the TomTom LINK 300 using the holder. The holder can be affixed either with the the two self-tapping screws or with the adhesive strips. To use the self-tapping screws, see the description below.
  • Page 18 Mounting external GPS antenna Important! • Only use the GPS antenna from TomTom If you install the TomTom LINK 300 in a place WORK, or the GPS performance will be where it is not visible, so that it does not have poor or will not work at all.
  • Page 19 1. Remove the rubber cap from the GPS antenna connector. 2. Insert the plug of the GPS antenna into the GPS antenna connector on the TomTom LINK 300. 3. Prepare a smooth, clean, oil free and dry surface in the windshield.
  • Page 20 Diagnostics Monitoring operation Diagnostics Monitor the operation of TomTom LINK 300 according to the table below. LED mode Unit is in Standby mode 1sec on, 100ms off, 100ms on, Waiting for GPRS 100ms off 1sec on, 100ms off Waiting for GPS...
  • Page 21 TomTom WORK GPS antenna. (see Alternative Mounting on page 18) Support If you cannot find the answer to your question with the help of the tables above please contact the TomTom WORK support team via the support form on our website www.tomtomwork.com/us/company/support-contact.xml...
  • Page 22 300 after you have made sure you have carried out all previously described steps without success. To reset the TomTom LINK 300 press the reset button with a thin pointed object until it clicks and keep it pressed for 5 seconds. The unit reboots immediately after releasing the reset button.
  • Page 23: Technical Data

    Quadband GSM 850 / 900 / 1800 / 1900 Integrated GPS antenna and GPS receiver Bluetooth Integrated Bluetooth (class 2) for connection to TomTom navigation device Ignition input To be connected to the ignition clamp to switch on/off device together with ignition...
  • Page 24: Limited Warranty

    Responsible party in North America measures: TomTom, Inc., 150 Baker Avenue, Concord, MA 01742, Tel: • Reorient or relocate the receiving antenna. 866 459 3499 •...

Table of Contents