Table of Contents
Advertisement
Diagnostics
Understading your LINK 200
In the following table the different LED modes are explained showing you working stages of your
LINK 200.
Green LED
OFF
FLASHING - 3
times short
FLASHING - 2
times short
FLASHING - 1 time
short
ON - 1 second
Troubleshooting
If your LINK 200 does not report trips To WEBFLEET properly anymore, the device may need to be
reset. For this please contact the TomTom Telematics Customer Support.
If you experience technical issues or have frequently asked questions, please go to the Customer
Support Portal on http://buisiness.tomtom.com/support/
Red LED
ON
ON - 3 seconds
ON - 3 seconds
ON - 3 seconds
ON - 3 seconds
LINK 200 is booting.
The LINK 200 boots for approximately 30 sec-
onds after you have connected it to the OBD-II
port of the vehicle before it starts establishing
mobile network and GPS reception.
Establishing mobile network and GPS reception.
Establishing mobile network reception.
GPS reception is established.
Establishing GPS reception.
Mobile network reception is established.
System is ready.
Mobile network and GPS reception established.
8
Advertisement
Table of Contents
