Table of Contents
Advertisement
Universal Switcher Control Program
The Extron Universal Switcher Control Program, which communicates with the switcher via
the rear panel RS-232 port or front panel Configuration port of the unit, provides an easy
way to configure and operate the FOX SW8 switcher.
The program is compatible with Windows 2000, Windows XP, Windows 7, and newer
Windows operating systems. Updates to this program can be downloaded from the Extron
website (www.extron.com).
Installing the Software
The program is contained on the Extron Software Products DVD. Install the software as
follows:
1.
2.
3.
4.
5.
Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the DVD.
The Extron software DVD window appears (see figure 9).
Figure 9.
Software DVD Window
Click the
tab (see figure 9).
Software
Scroll to the desired program and click
Figure 10.
Software Installation
Follow the on-screen instructions. By default, the installation of the Universal Switcher
Control Program creates the folder
32-bit versions of Windows 7]\
into a group folder named Extron Electronics\Universal Switcher:
Check for Universal Switcher Updates
•
Uninstall Universal Switcher
•
Universal Switcher Help
•
Universal Switcher Control Program
•
(see figure 10).
Install
[or
C:\Program Files
\
Extron
UniversalSwitcher
FOX SW8 • Remote Control
for
Program Files (x86)
, and it places four icons
12
Advertisement
Table of Contents
