X Function Setting Jp; Fx Duplex Setting Jp - KTI Networks KC-350-C Installation Manual

3.1.2 802.3x Function Setting JP2

IEEE 802.3x function is the flow control method used for full duplex operation on TP port and FX port
under store and forward mode. This method uses pause frames for one port to stop further transmission
from its link partner.

3.1.3 FX Duplex Setting JP3

This setting is used to set the duplex mode of the FX port.
3.2 JP1-JP3 Factory Default Settings
The factory default settings for JP1, JP2, and JP3 are as follows:
JP1 Open Store-and-forward mode
JP2 Open 802.3x function is enabled
JP3 Open FX port full duplex
23