Preparing And Starting Up The Station - Husky MP2500 Pocket Manual

Preparing and starting up the station

1. Connect the various items of the station together (see below).
UHF antenna
& transmitter
Mounted on a separate mast
placed at some distance from
Cable P0100289
(10 meters)
RS422
Power
Cable P0100349
(4)
-
Required for ... SK stations
Battery capacity: 20 Ah minimum for
an operating time of 10 to 12 hours on
2. Measure the height of the GPS antenna phase center from the
ground according to one of the three possible methods (see p. 28).
For SP-type stations, no UHF transmitter & antenna, with
nothing connected to the RS422 port at the rear of the unit
the GPS antenna
Receiver
unit
(3)
(2)
+ -
External battery
(not supplied)
B tt i
average
3.6 cm
1.2 cm
Câble C5050196
Coaxial
RS232
Battery compartment (empty if
an external battery is used)
(1)
+
t
Phase center
NAP00x
GPS
antenna
Cable P076501A
Palmtop
(required at start up
and for monitoring)
Swapping the battery
for another is possible
without having to shut
down the station
5