Table of Contents
Advertisement
- Then produces a series of flashes corresponding to the number of
received SVs on L1 and L2 (or L1 only if single-frequency).
- If indefinitely ON, denotes a reception problem.
2: UHF data link indicator light
- Station: Flashes whenever a corrections message is transmitted.
- Rover: Flashes whenever a corrections message is received &
decoded.
3: Position processing indicator light
- OFF: unable to work in the requested operating mode.
- Flashing : in the process of switching to the requested operating
mode.
- ON: now working in the requested operating mode.
4: Raw data recording indicator light
- OFF: No recording in progress, no recording session pending
- Flashing: At least one recording session is pending.
- ON: Data recording in progress.
5: Session indicator light
- OFF: Non-powered receiver, no planned session
- ON: Receiver is ON
- Flashing (slow rate): At least one session is pending
- Flashing (equal ON/OFF times): Switching off in progress (see
ON/OFF push-button).
- Flashing (fast rate): Default configuration loading being requested;
confirmation needed (see ON/OFF push-button)
6 : Not used
25
Advertisement
Table of Contents
