Table of Contents
Advertisement
1
4
5
6. Before undertaking the job itself, read the indications in the
status bar: wait for the letter L (LRK), or K (KART) to appear
and check that the UHF reception level and Battery states are
good (see also page 27).
Later, to change the job:
1. Select
2. Select the desired job in the displayed list, then hit
3. Select the desired file in the displayed list, then hit
(*) : The number ahead of the function name (here "2") means that, after selecting the icon, you
can access the function directly by hitting the corresponding key (here key "2"). This remark
applies to all functions in menus. The ">" symbol means that you must successively select the
icon, and then the function. This frequently-used symbol has the same meaning throughout this
guide.
2
3
6
>2 - UHF Receiver (*)
> 1 – Choose a job
Main Menu screen
To select an icon menu, use
or hit directly the key corresponding
to the icon order number shown
opposite
Check that
the frequency and
number displayed
here are those of the
station (see top of
page 7), otherwise
correct them so that
they are the same
then
,
.
11
Advertisement
Table of Contents
