Table of Contents
Advertisement
2. Switch on the palmtop (red key).
3. When « C:\>< » is displayed, type in "t" then press
4. Choose "Rover" and press
5. Wait for the screen to display Choose a job. Then:
Select a job from the list
10
(Cont'd on next page)
If the list is empty, press C then
to create an empty job.
E
This job only allows you to use
the logging function in the
coordinate system used by the unit
(i.e. in WGS84 if you use the system
for the very first time, or else in the
coordinate system of the job last
performed)
For any job opened for the first
time, you are asked to create a
new file. Complete the fields
opposite (then hit
to create this file and select the
next screen)
Advertisement
Table of Contents
