Measurement - Applied Precision ISOMET 2114 User Manual

After switching the measuring unit on and uploading parameters from the connected probe, Stand by
Page containing serial number of the connected probe is shown on the display.
After short initialization procedure, continuous temperature measurement is activated by means of
two temperature sensors installed in the measurement probe. Temperature values, signed as T
and T , are displayed with the slope of their time dependence qualifying the state of thermal
INT
equilibrium around the probe.
Further data, measurement range of the connected probe and measurement label are edited in the
system menu.
Control keys on the Stand By page:
F1 ................................. start measurement
F4 ................................. review and deleting results
F5 ................................. switches to the system menu of the page where configuration of
Function keys without graphical presentation are not active.
Loading parameters
Thermal conductivity measurement is started by pressing the key F1. After running thermal
conductivity measurement, Stand By page turns to the Measurement page.
Active function keys on the Measurement page:
F1 ............ serves for stopping thermal conductivity measurement. Pressing the key F1
displays request for stopping the measurement. The running measurement is
stopped after confirmation by the key F5.
F4 ............ displays results in the database
F5 ............ switches to the System Menu page, where configuration of measurement and the
system can be performed
Measurement page contains progress bar characterizing progress of the measurement time and
number of selected measurements with number of the measurement in progress.
14

4.1 Measurement

measurement and the system can be performed
ISOMET 2114
User's Guide
Stand By page
www.appliedp.com
HTR