Applied Precision ISOMET 2114 User Manual page 12

Batteries Charger Status is indicated by means of the green LED, situated on the front panel
keyboard under key F5.
Batteries Charger Status LED has three statuses:
- no light ..................... power adapter (charger) not connected
- flashing .................... batteries are charging
- steady light ............... batteries charging has been stopped
Charging time of discharged batteries is approx. 4.5 hours.
Use power adapter supplied with the device only.
Rechargeable batteries need periodical recharge, storing discharged batteries can cause their
damage.
12
CAUTION !!
Power Adapter WSPA 2000
ISOMET 2114
User's Guide
www.appliedp.com