Applied Precision ISOMET 2114 User Manual page 27

ISOMET2114
User's Guide
Data structure in the file "resNNNN_YYYYMMDDHHMMSS,csv"
CSV extension of the results file serves to open the file in standard spreadsheets and data analysis
software. Measurement results are recorded in rows. Items of a measurement record are organized
in columns. Symbols and abbreviations in the header row are as follows:
Meas ID
Date
Time
Material
Label2
Label3
SNProbe
MeasMethod
MeasRangeFrom Measurement range of the probe – Lower limit
MeasRangeTo
Lambda
Cro
A
TMeanHtr
DeltaT
UserCalConstK
UserCalConstQ
MeasTime
Measured thermal conductivity values in units W/m.K are in the column Lambda and volume heat
capacity values in units MJ/m
www.appliedp.com
Test identification number
Date of the mesurement
Time of the mesurement
Material entered by the user
Label2 entered by the user
Label3 entered by the user
Serial Number of the probe
Measurement method
Measurement range of the probe – Higher limit
Thermal conductivtity (W/m.K)
Volume heat capacity(MJ/m3.K)
Thermal diffusuvity(1E-6 m2/s)
Mean temperature T(htr)
Temperature rise
Calibration constant – k
Calibration constant – q
Period of measurement whith heater ON
3
.K are in the column Cro.
27