Table of Contents
Advertisement
You may need to install one or two Multiple Security Access Module (MSAM)
MSAM Card
cards or replace an old one.
Observe standard precautions in handling electrostatically sensitive devices.
CAUTION
Electrostatic discharge can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
To install or replace MSAM cards:
Installing or
Replacing MSAM
1
Card
2
3
4
Figure 15
Position the card's gold contacts facing upward toward the user. The card slot in
NOTE
the terminal has a set of contacts. The MSAM card has a notch on one corner to
ensure that it fits into the connector base in only one way.
Power off the terminal.
Place the terminal face down on a soft and clean surface.
Remove the cable cover of the unit.
Insert the SAM cards. Carefully slide the cards one at a time into the slots until
fully inserted.
SAM Insertion
To replace SAM card, gently slide out the old SAM card before inserting a new
one.
S
MSAM Card
M400 I
G
NSTALLATION
UIDE
ETUP
23
Hide quick links:
Advertisement
Table of Contents
