DAIKIN
Figure 3 Connecting KLIC-DI to bus P1/P2 with wired remote control (slave
A
B
C
P1 - P2
1 - 2
*
The model FDXS‐ ‐ ‐ ‐ E is controlled by KLIC-DD (see datasheet) because the internal
unit does not have P1/P2 port.
2.2. ELEMENTS DESCRIPTION
Prog: To set the device programming mode. When initially pushed, after BUS
Powering, "secure mode" is set.
Led: Led "On" indicates programming mode. Led blinking every 0,5s, the
device is set in "secure mode". It also indicates bidirectional communication
between KLIC-DI and Daikin unit.
ZENNiO
AVANCE Y TECNOLOGÍA
mode)
Diagrams Leyend
KLIC – DI
Daikin Wired remote control
Daikin SKY or VRV unit
Daikin connection bus
Zennio connection terminal
The wired remote control must operate in the opposite mode to
KLIC-DI
Notes
DAIKIN
www.zennio.com
6