3.5 FRON
NT ROLLE
ER REPLA
1) Remove
the motor co
2)
Loosen both of the rear roller bolts to remove tension from the running belt (Fig-1).
Remove the spring from the drive belt tensioner (Fig-2). The tensioner should now pivot
T70-02 only:
3)
away from the drive belt.
Fig
g-1
3) Remove
e the drive b
4) Remove
e front roller
5) Reverse
e steps to re
CH
HAPTER 3
CEMENT
over as outlin
ned in Sectio
elt from the m
motor pulley
bolts and re
move front ro
place front roller and drive belt.
3: Part Re
eplacemen
on 3.1.
Fig-
y.(Fig-1)
oller and driv
ve belt.
nt Guide
2
22 2