T-Share Expansion - Accusys A12T3-Share User Manual

1. Introduction
3.5

T-Share Expansion

By utilizing T-Share Expansion, users are able to pair two A12T3-Share devices doubling the
available Thunderbolt 3 ports to eight. Each port provides rapid transfer speeds and allows large
workgroups to simultaneously collaborate on projects with extreme workflow efficiency.
Requirement
- Two A12T3-Share RAID systems
- 2M PCIe cable
Installation
1) Set T-Share Expansion switch of 1st RAID system to 'Master', 2nd RAID system to 'Slave'.
2) Use a PCIe cable to connect PCIe port of both RAID systems.
3) Power on 2nd RAID system first and then power on 1st RAID system in 1 minute, then you
can install drive and setup RAID system.
User Guide Page 3-5