Answering A Call - Swisscom Aton C26 User Manual

U
SING THE PHONE

Answering a call

To answer an incoming call, pick up the handset. During talking mode, the following will be displayed:
<Caller number>
If the name/number is available, it will be shown in the lower line. The name has priority.
<Caller number>
Swisscom
During a call the handset icon is turned on. The time counter starts after 8s. The caller's number will dis-
appear after approx. 8s.
Microphone mute
While in talking mode, press the Mute key once, then the microphone will be muted. The following will
be displayed:
Swisscom
The Mute icon is turned on.
To release the mute function, press the Mute key again.
"Register recall" / flash signal
During talking mode, press the Recall (Flash) key. The unit will send a flash signal to the network. The
default time is 100ms.
Pause
To insert a pause, press the Pause (Redial) key while typing a number. This function can be used in
dialling and storing mode. The default time for the pause is 2s. During the pause, the unit remains in the
mute state.
31 01 12 28
00-13
31 01 12 28
00-13
31 01 12 28
00-13
8