Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock; Operating The Handset; Control Key On The Handset - Swisscom Classic S112 Manual

Operating the handset

Activating/deactivating the handset

a
Press and hold the end call key
(confirmation beep).
Activating/deactivating the keypad
lock
#
Press and hold the hash key.
You will hear the confirmation beep. The
Ø
icon appears in the display when the
keypad lock is activated.
The keypad lock deactivates automatically
when you receive a call and activates again
after the call.
Operating the handset

Control key on the handset

§§§§INT§§ §§Menu
1 Display functions
2 Control key
In this user guide, the side of the control key
that you must press in the given operating situ-
ation is shown in black (top, bottom, right, left).
t
Example: for "press the top of the control
key".
The control key has a number of different
functions:
When the handset is in idle status
s
Open the directory.
t
Set the handset ringtone volume
(see also Menu tree, page 15).
In lists and menus
t s
/ Scroll up/down line by line.
In an input field
t s
/ Move the cursor left or right.
During an external call
s
Open the directory.
t
Change loudspeaker volume.
4
Using display functions
The current display functions are shown reverse
highlighted in the bottom display line (e.g.
u v
/

Returning to idle status

You wish to return to idle status from anywhere
in the menu:
¤
Press the end call key
Or:
¤
Press no key: after 2 minutes the display will
return automatically to its idle status.

Making calls

Making an external call

External calls are calls using the public tele-
phone network.
1
~ c
Or:
c ~
2

Ending calls/cancelling dialling

a

Answering a call

Press the talk key
When
Auto Answer
page 15), simply remove the handset from the
base station/charging cradle.
Calling Line Identification
When you get a call, you will see the caller's
number in the display. His name will also be dis-
played if it is saved in the directory.
Requirements:
1. You have asked your network provider for
the caller's number to be displayed on your
handset screen (CLIP).
2. The caller has asked the network provider
for his number to be identified (CLI).
* Depending on the network provider
Launch left / right display func-
tion.
a
and hold.
Enter the number and press the
talk key.
Press and hold the talk key
and then enter the number.
Press the end call key.
c
.
is activated (see Menu tree,
*
).
Edit
c