Menu 9.7.4 - Setting The Valve Protection - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

16.7 Menu 9.7.4 - Setting the valve protection

If an electrothermal control valve (e.g. for floor heating) is not
activated for a longer period of time (e.g. in summer),
it may get stuck.
Prevent the control valve getting stuck with the "Valve
protection" function.
The valve is switched on for a set time at 10:00 if it has not been
activated for longer than 3 days (>72 hours).
1.
2.
3.
Open menu 9.7.4.
Switch on the valve protection.
On = Valve protection on
OFF = Valve protection off
Set the minimum on-time.
e.g. 3 minutes
EN
87