Menu 9.9.2 - Setting The Duofern Mode - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

18.2 Menu 9.9.2 - Setting the DuoFern mode

The DuoFern Room Thermostat 9485 features two DuoFern
modes that enable you to specify how the it behaves within the
DuoFern network or in the local installation on site.
Setting heating phases centrally in the HomePilot® or
locally in the DuoFern Room Thermostat 9485
[ 1 ] DuoFern receiver
◆ Heating phases are controlled centrally (e.g. through
scenes), for example, by the HomePilot®
◆ No local heating phases can be set and activated in this
mode
[ 3 ] Local operation (factory setting)
◆ The heating phases set in the DuoFern Room Thermostat
9485 are stored locally
◆ In addition, control commands can also be received and
executed from the DuoFern network (e.g. from a DuoFern
manual transmitter)
i
All manual and automatic control signals received
via radio are executed on site regardless of the set
mode.
EN
107