On The Standard Display - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

13. Switching automatic mode on/off directly
OK

on the standard display

Automatic mode on
◆ All previously set automatic functions are active.
◆ Manual operation is also possible in automatic mode.
Automatic mode off
◆ All set automatic functions are deactivated.
1.
OK
1 sec.
i
Press the OK button for one
second on the standard display.
If the target temperature was previously changed,
you have only reset the manual change of the target
temperature in the first step.
◆ Press the OK button again in this case to switch off
automatic mode.
Automatic mode on
Automatic mode off
EN
53