Calling Up And Displaying Weather Data - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

14. Calling up and displaying weather data

The DuoFern Room Thermostat 9485 can receive and display
weather data (temperature, brightness, wind velocity and rain)
from a DuoFern Environmental Sensor. It is not necessary to log
the DuoFern Environmental Sensor on to the DuoFern Room
Thermostat 9485.
i
i
1.
As soon as an environmental sensor is detected,
the corresponding symbol is shown on the display.
2.
54
Environmental sensors update the weather data
approx. every 5 minutes and therefore it can take a
few minutes until the weather data is displayed.
◆ If no new weather data is received for
45 minutes, this is no longer available.
In the event that multiple DuoFern Environmental
Sensors are being received, the desired environmental
sensor can be selected in menu 9.9.4, see page 110.
Pressing the SET button briefly displays
the first weather data.
EN