RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning page 50

11. Initial commissioning with the help of the
i
installation wizard
Assigning different target temperatures
Each heating phase can be assigned an individual target
temperature. You can set four target temperatures and assign
any number of heating phases, see page 59, menu 2.
6.
7.
8.
9.
10.
50
Select and confirm the number of the
desired target temperature for this
heating phase.
Set and confirm the desired target
temperature.
Factory setting = 1 . 21.5 °C
Set and confirm the starting time of
the second heating phase.
Factory setting = 23:00
Select and confirm the number of the
desired target temperature for this
heating phase.
Set and confirm the desired target
temperature.
Factory setting = 2 . 17.0 °C
EN